T100 CHP
    T100 versions
T100 components
Technical information
Installation
     
   faq — T100 CHP
 Technical information 
    Datasheet International   
General identification
 Usage   Indoor/outdoor
 Dimension   Width 900 mm
Height 1810 mm
Length 2770 mm
 Weight   T100 P 2250-2750 kg (*)
T100 PH 2770-3100 kg (*)
 Fuel
  Natural gas (**)
 (*) Indoor / Outdoor
 (**) Different fuel is availible on request (biogas, diesel, kerosene, methanol, LPC)
Electrical data
 Voltage ouput   400/230 V AC, 3 phases
 Frequency output   50 Hz (60 Hz)
Fuel requirements
 Pressure min/max   0.02 / 1.0 bar(g)
 Temperature min/max   0 / 60 °C
 Lower heating value   38-50 MJ/kg
Hot water installation (power & Heat)
 Thermal output (hot water)   155 kW (±5) @ 70-90 °C
 Total efficiency   77 % (±1) @ 70-90 °C
 Min water inlet temperature   50 °C
 Max water outlet temperature   150 °C
 Max water pressure   25 bar(g)
 Exhaust gas temperature   90 °C @ 70-90 °C
Performance data
 Electrical output   100 kW (±3)
 Electrical efficiency   33 % (±1)
 Fuel consumption   333 kW
 Exhaust gas flow   0.80 kg/s
 Exhaust gas temperature   270 °C
 Noise level   70 dBA @ 1 meter
 NOx   < 15 ppm/v = 32 mg/MJ fuel (*) (**)
 CO   < 15 ppm/v = 18 mg/MJ fuel (*) (**)
 (*) Volumetric exhaust gas emission @ 15% 02, 100 % load and 15 °C air inlet temperature
 (**) Turbec T100 is fully certified by CARB (Californian Air Resource Board)
Maintanance
 Expected life time of main components
 Gas turbine engine   > 60 000 hrs
 Recuperator   > 60 000 hrs
 Combustor   > 30 000 hrs
 Preventive (scheduled) maintanance   Interval / Outage
 Recuperator   6 000 / 2 hrs
 Combustor   30 000 / 8 hrs